XCalibur1740

The XCalibur1740 is a high-performance, multiprocessing, 6U VPX, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With dual Power Architecture® e500v2 cores running at up to 1.2 GHz, the NXP (formerly Freescale) QorIQ P2020 delivers enhanced performance and efficiency for today’s embedded computing applications.

The XCalibur1740 provides up to 8 GB of DDR3 ECC SDRAM, two XMC/PMC slots, and 512 MB of NOR flash (with redundancy). The XCalibur1740 also supports three Gigabit Ethernet ports, XMC I/O, PMC I/O, and two RS-232/422/485 serial ports out the front panel and/or VPX backplane connectors.

The XCalibur1740 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. For customers seeking a lower power option, the XCalibur1740 can be designed with the NXP P1020 processor, offering a reduction of approximately 7 W. Operating system support for Wind River VxWorks, Green Hills INTEGRITY-178, QNX Neutrino, and Linux is available.

Features

• NXP QorIQ P2020 processor with dual Power Architecture® e500v2 cores at up to 1.2 GHz
• Alternate NXP QorIQ processors available: P1011, P1020, and P2010
• 6U VPX module
• Conduction or air cooling
• VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
• Up to 8 GB DDR3 ECC SDRAM
• Up to 512 MB of NOR flash (with redundancy)
• Up to 32 GB of CPU NAND flash
• x4 PCI Express lane from CPU to switch
• x4 PCI Express to XMC sites
• Four x4 (x16 total) PCI Express lanes from switch to P1
• One USB 2.0 port
• Three Gigabit Ethernet ports
• Two RS-232/422/485 serial ports
• Two XMC/PrPMC interfaces
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY-178 BSP

Technical Specs

Processor

• NXP (formerly Freescale) QorIQ P2020 processor
• Dual Power Architecture® e500v2 cores at up to 1.2 GHz
• 512 kB of shared L2 cache

Alternate Processor Configuration

• P1011 processor with one Power Architecture® e500v2 core at up to 800 MHz
• P1020 processor with two Power Architecture® e500v2 cores at up to 800 MHz
• P2010 processor with one Power Architecture® e500v2 core at up to 1.2 GHz

Memory

• Up to 8 GB of DDR3 ECC SDRAM
• Up to 512 MB of NOR flash (with redundancy)
• Up to 32 GB of NAND flash

XMC/PrPMC

• PCI-X (64/32-bit, 100/66 MHz)
• PCI (64/32-bit, 66/33 MHz)
• x4 PCIe port to P15 and P25 (XMC)

VPX

• VITA 46.0
• VITA 46.11 (System Management on VPX)
• VITA 46.4 (Four x4 PCIe lanes to P1)
• VITA 46.7 (Two 1000BASE-BX Ethernet ports to P4)
• VITA 46.9 (PMC and XMC I/O to P3, P4, P5, P6, mapping P3w1P4-P64s+X12d+X8d)

Front Panel

• Two RS-232 serial ports
• One Gigabit Ethernet port
• One USB 2.0 port
• General-purpose LEDs

Back Panel

• Two RS-232/422/485 serial ports
• Two Gigabit Ethernet ports
• One USB 2.0 port

IPMI

• Onboard management controller
• VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)

Software Support

• Wind River VxWorks BSP
• Linux BSP
• Green Hills INTEGRITY-178 BSP
• Contact factory for availability of QNX Neutrino and LynuxWorks LynxOS BSPs

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements (Estimate)

• Power will vary based on configuration and usage. Please consult factory.

Accessories

• XIt1040 (90060235) - 6U VPX Rear Transition Module with Gigabit Ethernet, SATA, USB, and Serial
• XPand1011 (90072275) - Two-Slot 6U VPX Development Platform for Conduction-Cooled Modules with RTM I/O
• XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet