The XPedite5130 is a conduction- or air-cooled 3U CompactPCI (cPCI)single board computer based on the NXP (formerly Freescale) MPC8640D processor. With dual PowerPC e600 cores running at up to 1.25 GHz, the MPC8640D delivers enhanced performance and efficiency for today’s network information processing and other embedded computing applications.
Complementing processor performance, the XPedite5130 features two separate channels of up to 2 GB each of DDR2-533 ECC SDRAM, multiple PCI Express interfaces, XMC/PrPMC support, up to 256 MB of NOR flash (with redundancy), and up to 4 GB of NAND flash. Two Gigabit Ethernet ports, two RS-232/422/485 ports, and P14 I/O from the PrPMC are routed to J2 for additional system flexibility.
The XPedite5130 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Operating system support packages for the XPedite5130 include Wind River VxWorks, Linux, QNX Neutrino, and Green Hills INTEGRITY.
Technical Specs
Processor
- NXP (formerly Freescale) MPC8640D processor
- Dual PowerPC e600 cores at up to 1.25 GHz
- 1 MB of L2 cache per core
Memory
- Up to 4 GB (2 GB each) of up to DDR2-533 ECC SDRAM in two channels
- Up to 256 MB of NOR flash (with redundancy)
- Up to 4 GB of NAND flash
J1 cPCI Interface
- 32-bit PCI interface operating at 33 or 66 MHz
- System controller capable with onboard clocking and arbitration
- Peripheral slot capable
J2 cPCI Interface
- Two 10/100/1000BASE-T Ethernet ports
- Two RS-232/422/485 serial ports
- PrPMC P14 I/O
- Four GPIO signals
XMC/PrPMC Site
- 32-bit, 66 MHz PCI bus (PMC P11/P12 interface)
- x8 PCIe interface (XMC P15 interface)
Front Panel I/O
- Front panel dual RJ-45 Ethernet and micro-DB-9 RS-232 serial ports available via optional plugover module
Software
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
Physical Characteristics
- Conduction- or air-cooled 3U CompactPCI form factor
- Dimensions: 100 mm x 160 mm
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Maximum power consumption: 32 W
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
