The XPedite7332 is a conduction- or air-cooled 3U CompactPCI (cPCI) single board computer based on the Intel® Core™ i7 processor and Intel® QM57 chipset. With dual cores operating at 2.53, 2.0, or 1.06 GHz, the Intel® Core™ i7 delivers enhanced performance and efficiency for today’s network information processing and other embedded computing applications.
Complementing processor performance, the XPedite7332 features up to 8 GB of DDR3-1066 ECC SDRAM in two channels, XMC support, and up to 16 GB of NAND flash. Two Gigabit Ethernet ports are routed to J2 for additional system flexibility.
The XPedite7332 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Operating system support packages for the XPedite7332 include Wind River VxWorks, QNX Neutrino, Green Hills INTEGRITY, and Linux.
Technical Specs
Processor
- Intel® Core™ i7 processor operating at 2.53, 2.0, or 1.06 GHz
- Dual-core with Hyper-Threading Technology
- Intel® QM57 chipset
- Dual channel integrated memory controller
- Integrated graphics controller
- 4 MB of shared cache
Memory
- Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
- 32 MB NOR boot flash
- Up to 16 GB of NAND flash
J1 cPCI Interface
- 32-bit PCI interface operating at 33 or 66 MHz
- System controller capable with onboard clocking and arbitration
- Peripheral slot capable
J2 cPCI Interface
- Two 10/100/1000BASE-T Ethernet ports
- Two RS-232/422/485 serial ports
- Four GPIO signals
- Four SATA ports
- Two USB 2.0 ports
- One DVI port
XMC Site
There are restrictions on the XMC front panel. Contact factory for details.
- x8 PCIe port (XMC interface)
- Two SATA ports
Software Support
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
- Microsoft Windows drivers
Physical Characteristics
- Conduction- or air-cooled 3U CompactPCI form factor
- Dimensions: 100 mm x 160 mm
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet