The XPedite5200 is a high-performance, Processor PCI Mezzanine Card(PrPMC)/Switched Mezzanine Card (XMC) featuring the NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor running at up to 1.333 GHz. The onboard PowerQUICC™ III provides integrated 64-bit PCI-X, DDR2-400/533 SDRAM, PCI Express/Serial RapidIO, and four Gigabit Ethernet ports, making the XPedite5200 an optimal solution for communications processing and general computing applications alike.
When used as an XMC (VITA 42) module, either the x8 PCI Express or x4 Serial RapidIO interfaces can be used, in parallel or in substitution of the PCI-X interface. With software supplied by Extreme Engineering Solutions, the XPedite5200 can be installed on standard VME and CompactPCI (cPCI) platforms as well as custom motherboards that support PMC sites.
The XPedite5200 provides two Gigabit Ethernet ports via the front panel and supports an additional two via the P14 backplane connector.
Technical Specs
Processor
- NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor
- Embedded PowerPC e500 core at up to 1.333 GHz
- 3065 MIPS at 1.333 GHz
- 32 kB L1 instruction/data caches
- 512 kB L2 cache
- Double-precision Floating-Point Unit (FPU)
- Integrated MMU
- DDR2-533 SDRAM interface
- x8 PCI Express or x4 Serial RapidIO
- 133 MHz, 64-bit PCI-X 1.0a interface
- Four 10/100/1000BASE-T, IEEE 802.3-compliant Ethernet controllers
- Two serial controllers
- Two I²C controllers
Memory
- Up to 4 GB DDR2-400/533 SDRAM
- Up to 256 MB NOR flash
- Up to 2 GB NAND flash
- 2 kB SEEPROM
XMC
- x8 PCI Express (VITA 42.3)
- x4 Serial RapidIO (VITA 42.2)
- IPMI support
- GPIO on user data
RTC
- M41T00 I²C timekeeper
- 60 hour clock retention
Front Panel I/O
- Two Gigabit Ethernet ports
- One RS-232 serial port
- Link and activity LEDs
Rear I/O
- Two Gigabit Ethernet ports
- Eight GPIO pins
- Two RS-232 serial ports
Software
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
- Linux BSP
Physical Characteristics
- XMC/PMC form factor
- Dimensions: 149 mm x 74 mm, 10 mm stacking height
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
