The XPedite5201 is a high-performance, conduction-cooled Processor PCI Mezzanine Card (PrPMC)/XMC featuring the NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor running at up to 1.333 GHz. The onboard PowerQUICC™ III provides integrated 64-bit PCI-X, DDR2-400/533 SDRAM, PCI Express, and two Gigabit Ethernet interfaces, making the XPedite5201 an optimal solution for communications processing and general computing applications alike.
When used as an XMC (VITA 42) module, the x8 PCI Express interface can be used, in parallel or in substitution of the PCI-X interface. With software supplied by Extreme Engineering Solutions, the XPedite5201 can be installed on standard VME and CompactPCI (cPCI) platforms as well as custom motherboards that support PMC sites.
The XPedite5201 provides two Gigabit Ethernet interfaces via the P14 backplane connector.
Technical Specs
Processor
- NXP (formerly Freescale) PowerQUICC™ III MPC8548E processor
- Embedded PowerPC e500 core at 1.0 to 1.333 GHz
- 3065 MIPS at 1.333 GHz
- 32 kB L1 instruction/data caches
- 512 kB L2 cache
- Double-precision Floating-Point Unit (FPU)
- Integrated MMU
- DDR2-533 SDRAM interface
- x8 PCI Express
- 133 MHz, 64-bit PCI-X 1.0a interface
- Four 10/100/1000 Mbps, IEEE 802.3-compliant Ethernet controllers
- Two serial controllers
- Two I²C controllers
Memory
- Up to 4 GB DDR2-533 SDRAM
- Up to 256 MB NOR flash
- Up to 4 GB NAND flash
- 2 kB SEEPROM
XMC
- x8 PCI Express (VITA 42.3)
- IPMI FRU support
- GPIO on user data
RTC
- M41T00 I²C timekeeper
- 60 hour clock retention
Rear I/O
- Two Gigabit Ethernet ports
- Four GPIO pins
- Two RS-232 serial ports
Software
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY BSP
- Linux BSP
Physical Characteristics
- XMC/PMC conduction-cooled form factor
- Dimensions: 149 mm x 74 mm, 10 mm stacking height
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Maximum power consumption: 13.35 W (with 1.333 GHz processor), 10.5 W (with 1 GHz processor)
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
