XPedite7130

The XPedite7130 is a high-performance, low-power 3U cPCI single board computer based on the Intel® Core™2 Duo processor. With two Gigabit Ethernet ports and a 33 MHz PCI interface, the XPedite7130 is ideal for high-bandwidth data-processing applications.

The XPedite7130 accommodates up to 4 GB of DDR2-400 ECC SDRAM to support memory-intensive applications, and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA 1.5 Gb/s, and RS-232/422/485 through the P2 backplane connector.

Linux 2.6, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Microsoft Windows drivers, are available for the XPedite7130.

Features

• Intel® Core™2 Duo processor at up to 1.8 GHz
• 3U cPCI module
• Conduction or air cooling
• Up to 4 GB of DDR2-400 ECC SDRAM
• Up to 2 MB firmware hub flash (or 1 MB with redundancy)
• 4 GB of NAND flash
• XMC/PrPMC interface with front panel I/O support
• 32-bit, 33 MHz cPCI rear panel interface
• Two rear panel Gigabit Ethernet ports with integrated magnetics
• Two rear panel USB 2.0 high-speed ports
• Six rear panel SATA 1.5 Gb/s ports
• Two rear panel RS-232/422/485 serial ports
• Front I/O available via plugover module
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• Microsoft Windows drivers

Technical Specs

Processor

• Intel® Core™2 Duo at up to 1.8 GHz
• 200 MHz (800 MT/s) FSB
• Up to 6 MB of L2 cache

Memory

• Up to 4 GB of DDR2-400 ECC SDRAM
• Up to 2 MB firmware hub flash (or 1 MB with redundancy)
• 4 GB of NAND flash

J1 cPCI

• 32-bit, 33/66 MHz PCI interface
• System controller capable with onboard clocking and arbitration
• Peripheral slot capable

J2 cPCI Interface

• Two Gigabit Ethernet ports
• Six SATA 1.5 Gb/s ports
• Two USB 2.0 ports
• Two RS-232/422/485 serial ports
• I²C port
• 3.3 V GPIO signals

PrXMC/PMC Site

• 32-bit, 33 MHz PCI bus (PMC interface)
• x4 PCIe port (XMC interface)

Front Panel I/O

• Front panel RJ-45 Ethernet, USB, and micro-DB-9 RS-232 serial ports available via optional plugover module

Software Support

• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• Microsoft Windows drivers

Physical Characteristics

• 3U cPCI conduction- or air-cooled form factor
• Dimensions: 100 mm x 160 mm
• 0.8 in. pitch

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet