The XCalibur4401 is a high-performance, 6U CompactPCI, multiprocessing, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption.
With the 2nd or 3rd generation Intel® Core™ i7 processor, the XCalibur4401 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.
The XCalibur4401 provides up to 16 GB of DDR3 ECC SDRAM in two channels, one PrXMC/PrPMC slot, and up to 128 GB of NAND flash. The XCalibur4401 also supports Gigabit Ethernet, SATA, I²C, USB, PMC I/O, XMC I/O, and DVI graphics out the connectors.
The XCalibur4401 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.
Technical Specs
Processor
- Quad- or dual-core Intel® Core™ i7
- Intel® Turbo Boost Technology
- Intel® Hyper-Threading Technology
- AVX instruction set extensions
- Integrated with Intel® QM67 chipset
- Dual-channel integrated memory controller
Quad-Core Processor Configurations
- Core™ i7-3612QE: 2.1 GHz, 6 MB cache
Dual-Core Processor Configurations
- Core™ i7-2655LE: 2.2 GHz, 4 MB cache
- Core™ i7-2610UE: 1.5 GHz, 4 MB cache
- Core™ i7-3555LE: 2.5 GHz, 4 MB cache
- Core™ i7-3517UE: 1.7 GHz, 4 MB cache
Memory
- Up to 16 GB of DDR3 ECC SDRAM in two channels
- Up to 128 GB of NAND flash
Security and Management
- Baseboard Management Controller (IPMI)
- Optional Trusted Platform Module (TPM)
- Non-volatile memory write protection
cPCI
- 66 MHz 32-bit PCI interface to J1 and J2
- PICMG 2.1 (Hot Swap support)
- PICMG 2.3 (PMC I/O to P3 and P5)
- PICMG 2.9 (dedicated IPMI controller)
- PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)
PrPMC
- PCI-X (32/64-bit, 66/100 MHz)
- PCI (32/64-bit, 33/66 MHz)
XMC (VITA 42.3)
- One SATA port capable of 6 Gb/s
- x8 PCI Express Gen2 (5 GT/s)
- Intel® High Definition Audio port
- Two USB 2.0 ports
Front Panel I/O (Optional)
- DVI-D interface
- Three 10/100/1000BASE-T Ethernet ports
- Two USB 2.0 ports
- General-purpose LEDs
Back Panel
- Two RS-232/422/485 serial ports
- Two 10/100/1000BASE-T Ethernet ports
- Four SATA ports capable of 3 Gb/s
- PMC I/O
- Two USB 2.0 ports
- DisplayPort interface
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
