The XPedite7674 is a high-performance, 3U VPX-REDI, multiprocessing, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. Featuring Intel® Xeon® D-1500 family processors coupled with the AMD (formerly Xilinx) Kintex® UltraScale™ FPGA, the XPedite7674 delivers enhanced performance and efficiency for today’s embedded computing applications.
The XPedite7674 integrates SecureCOTS™ technology with the Kintex® UltraScale™ FPGA for hosting custom functions to protect data from being modified or observed and provides an ideal solution when stringent security capabilities are required. The XPedite7674 provides secure network interfaces by providing one 1000BASE-X Gigabit Ethernet interface from the FPGA and two CPU 10 Gigabit 10GBASE-KR Ethernet interfaces.
It accommodates up to 16 GB of DDR4 ECC SDRAM in two channels and up to 32 GB of onboard SATA NAND flash in addition to numerous I/O ports, including USB, SATA, and RS-232/422/485 serial through the backplane connectors. The XPedite7674 provides additional expansion capabilities by including an XMC site. This XMC site includes a x8 PCIe connection to the Intel® Xeon® D processor and X12d I/O mapped directly to the VPX backplane connectors.
Wind River VxWorks, X-ES Enterprise Linux (XEL), and LynxSecure Safety Bundle (LSB) are available for board support. The XPedite7674 uses coreboot, powered by Intel®’s Firmware Support Package (FSP), to provide fast boot times and significantly simplify code traceability over legacy BIOS implementations.
Technical Specs
Processor
- Intel® Xeon® D-1500 family processors (formerly Broadwell-DE)
- Up to 16 Xeon®-class cores in a single, power-efficient SoC package
- 4, 8, or 12 core SKUs available with native extended temperature support
Memory
- Up to 16 GB of DDR4 ECC SDRAM in two channels
- Up to 32 GB of SLC NAND flash
- 32 MB NOR boot flash
- 64 kB EEPROM
Security and Management
- AMD (formerly Xilinx) Kintex® Ultrascale™ XCKU060 or XCKU095 FPGA
- Designed with SecureCOTS™ technology to support enhanced security and trusted computing
- 1 Gb synchronous configuration BPI flash
- Up to 8 GB of DDR4 ECC SDRAM
- Two x4 PCI Express Gen3-capable interfaces
- One x4 PCI Express Gen2-capable interface
- Support for DeepCover Security Manager secure supervisor (optional)
VPX (VITA 46) P0 I/O
- One IPMB port
- VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
VPX (VITA 46) P1 I/O
- x4 PCI Express Gen3-capable interface to P1.A
- x4 PCI Express Gen3-capable interface to P1.B
- Two 10GBASE-KR Ethernet ports
- XMC P16 I/O, mapping P1w9-X12d per VITA 46.9
VPX (VITA 46) P2 I/O
- One SATA port capable of 6 Gb/s
- Two USB 2.0 ports
- Four RS-232/422/485 serial ports
- One 1000BASE-X Ethernet port from FPGA (optional)
- Four High-Speed Serial ports from FPGA
- GPIO from FPGA
XMC Site
- x8 PCI Express Gen3-capable port
- One SATA port
Software Support
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 1.0 in. pitch with Two-Level Maintenance (2LM) support (optional)
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
