The XCalibur4101 is a 6U CompactPCI single board computer featuring the Intel® Core™2 Duo processor and a ruggedized, conduction- or air-cooled design, making it ideal for today’s rugged embedded computing applications.
The XCalibur4101 provides up to 4 GB of DDR2-400 ECC SDRAM, 2 MB firmware hub flash (or 1 MB with redundancy), and two XMC/PMC slots. The XCalibur4101 also supports Gigabit Ethernet, I²C, USB, PMC I/O, XMC I/O, DVI dual-head graphics, and RS-232/422/485 serial ports out the J3 and J5 connectors.
The XCalibur4101 is a ruggedized, high-performance, feature-rich solution to support the next generation of rugged embedded applications. Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Microsoft Windows drivers, are available.
Technical Specs
Processor
- Intel® Core™2 Duo at up to 1.8 GHz
- 200 MHz (800 MT/s) FSB
- Up to 6 MB of L2 cache
Memory
- Up to 4 GB of DDR2-400 ECC SDRAM
- 2 MB firmware hub flash (or 1 MB with redundancy)
cPCI
- 66 MHz 64-bit PCI interface to J1 and J2
- PICMG 2.1 (Hot Swap support)
- PICMG 2.3 (PMC I/O to P3 and P5)
- PICMG 2.9 (dedicated IPMI controller)
- PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)
PMC
- PCI-X (32/64-bit, 66/100 MHz)
- PCI (32/64-bit, 33/66 MHz)
XMC (VITA 42.3)
- x1, x2, x4, x8 links supported
- Full-duplex 5 GT/s lanes
Graphics
- Front and rear panel DVI
- Resolutions supported: up to 2560x1600 RP and up to 1920x1200 FP, or two RP 1920x1200 each
Onboard SATA 1.5 Gb/s Storage
- Up to 64 GB Solid-State Drive (SSD)
Interfaces
- Gigabit Ethernet
- Two RS-232/422/485 serial ports
- Three USB 2.0 ports
- SATA 1.5 Gb/s
- DVI
Software Support
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY
- Microsoft Windows drivers
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
- Cable (90000165) - DVI, HDMI to HDMI, M to M, 2 m.
- Cable (90000170) - DVI, HDMI to DVI-D, M to M, 2 m.
- XTend202 (90070170) - Debug Module with LPC Cable
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
