The XPedite7472 is a secure and high-performance, 3U VPX-REDI, single board computer based on the 3rd generation Intel® Core™ i7 Ivy Bridge processor. The XPedite7472 is an optimal choice for computationally heavy applications requiring maximum data and information protection. With integrated SecureCOTS™ technology, the XPedite7472 protects data from being modified or observed and provides an ideal solution when stringent security capabilities are required.
The XPedite7472 includes a customizable Microsemi SmartFusion® security FPGA, which can control and monitor the Core™ i7 subsystem, as well as host custom functions such as data encryption. The XPedite7472 also accommodates up to 8 GB of DDR3 ECC SDRAM in two channels and up to 32 GB of secure, onboard, SATA NAND flash.
The XPedite7472 provides numerous I/O interfaces through the backplane connectors, including Gigabit Ethernet ports, USB 2.0 ports, SATA, graphics, and RS-232/422/485 serial ports. The XPedite7472 supports additional expansion from an integrated XMC/PMC site. Both the PMC and XMC sites include I/O mapped directly to the VPX backplane connectors, and the XMC site additionally includes a x8 PCIe connection to the Intel® Core™ i7 processor. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.
Technical Specs
Processor
- 3rd generation Intel® Core™ i7
- Intel® Turbo Boost Technology
- Intel® Hyper-Threading Technology
- AVX instruction set extensions
- Integrated high-performance 3D graphics controller
Memory
- Up to 8 GB of dual-channel DDR3 ECC SDRAM
- Up to 32 GB of SATA NAND flash
- 32 MB NOR boot flash
Security and Management
- Microsemi SmartFusion® security FPGA
- Designed with SecureCOTS™ technology to support enhanced security and trusted computing
- System voltage monitor and power-on/reset control
- SATA NAND quick-erase
- Non-volatile memory write protection
- Environmental sensors (see manual)
VPX (VITA 46) P0 I/O
- Microsemi SmartFusion® I²C port
VPX (VITA 46) P1 I/O
- x4 PCI Express Gen2-capable Fat Pipe interface to P1.A
- x4 PCI Express Gen2-capable Fat Pipe interface to P1.B
- Two 1000BASE-BX Ethernet ports or one 10/100/1000BASE-T Ethernet port *
- XMC P16 I/O, mapping P1w9-X12d per VITA 46.9
VPX (VITA 46) P2 I/O
- One 10/100/1000BASE-T Gigabit Ethernet port *
- Two SATA ports capable of 3 Gb/s
- Two USB 2.0 ports
- Two HDMI/DVI-D interfaces
- Two RS-232/422/485 serial ports
- 3.3 V GPIO signals
- Subset of PMC I/O per P2w1-P64s
XMC/PMC Site
- 32-bit, 33 MHz PCI bus (PMC interface)
- x8 PCIe Gen2-capable port (XMC interface)
- Two SATA ports capable of 6 Gb/s (XMC interface)
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 3, 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
