News & Events | Extreme Engineering Solutions (X-ES)

X-ES Introduces XPort9100: A Ruggedized XMC Module Providing +28V General Purpose I/O

November 4th, 2010 — News

Extreme Engineering Solutions, Inc. (X-ES) is now shipping the XPort9100, a ruggedized XMC module that supports eight +28 V general purpose input/output (GPIO) channels, commonly used to control subsystems within military aircraft and vehicles. The XPort9100 is designed for use in avionics, as well as ground vehicle and ship-board applications, to control subsystems such as fire…

X-ES Introduces XPedite7330: A 3U CompactPCI Single Board Computer with Intel® Core™ i7 Processor

November 2nd, 2010 — News

Extreme Engineering Solutions, Inc. (X-ES) announces the immediate availability of the XPedite7330, a conduction- or air-cooled 3U CompactPCI Single Board Computer (SBC) based on the Intel® Core™ i7 processor and Intel® QM57 chipset. The XPedite7330, with Intel® Core™ i7 processor with dual cores operating at 2.53, 2.0, or 1.06 GHz, delivers enhanced performance and efficiency for air-cooled, industrial and…

X-ES Introduces the Avionics Development Platform to Accelerate Deployed Avionics System Development

November 1st, 2010 — News

Extreme Engineering Solutions, Inc. (X-ES) is shipping the Avionics Development Platform (ADP) to facilitate the development and rapid deployment of avionics systems. The ADP is a prepackaged 3U OpenVPX™ development platform that provides functionality and I/O commonly required by avionics applications. The ADP enables the deployed system hardware to be developed in parallel with the software…

X-ES Announces XCalibur4301: A 6U CompactPCI Single Board Computer with Intel® Core™ i7 Processor

October 28th, 2010 — News

Extreme Engineering Solutions, Inc. (X-ES) announces the immediate availability of XCalibur4301, a conduction- or air-cooled 6U CompactPCI Single Board Computer (SBC) based on the Intel® Core™ i7 processor. For upgrades to existing commercial, industrial and military 6U cPCI applications, the XCalibur4301 delivers significant performance and efficiency improvements over previous SBCs. The XCalibur4301 is a powerful solution for the…

X-ES Introduces Ruggedized, Removable SATA Solid-State Disk with Encryption

October 27th, 2010 — News

Extreme Engineering Solutions, Inc. (X-ES) is now shipping the XPort6192, a ruggedized, removable SATA solid-state disk (SSD) supporting 256-bit AES encryption and declassification capabilities. With its storage capacity of up to 256 GB and its maximum performance of up to 240 MB/s (read) and 215 MB/s (write), the XPort6192 is ideal for conduction- or air-cooled military applications requiring…

Extreme Engineering Solutions Introduces XPedite5500: XMC/PrPMC Module Targeting NXP Dual-Core QorIQ P2020 Processor

September 29th, 2010 — News

Extreme Engineering Solutions (X-ES) is shipping the XPedite5500, an air-cooled XMC/PrPMC module based on NXP’s (formerly Freescale) dual-core QorIQ P2020 processor. The XPedite5500 has already earned design wins in commercial, telecom, and aviation applications that require the latest in dual-core Power Architecture® technology, where processor performance is enhanced by the low power nature of the…

XPedite5570: Extreme Engineering Solutions’ First 3U VPX Module with NXP Dual-Core QorIQ P2020 Processor

September 22nd, 2010 — News

Extreme Engineering Solutions (X-ES) announces the immediate availability of the XPedite5570, an air- or conduction-cooled 3U VPX single board computer (SBC), based on NXP’s (formerly Freescale) dual-core QorIQ P2020 processor. The XPedite5570 provides a low-power, high-performance SBC for Size, Weight, and Power (SWaP) constrained military applications. Consuming less than 20 watts, the XPedite5570 can host nearly any…

Extreme Engineering Solutions Introduces XPedite5530: Industry’s First 3U CompactPCI Module with NXP Dual-Core QorIQ P2020 Processor

September 14th, 2010 — News

Extreme Engineering Solutions (X-ES) announces the immediate availability of the XPedite5530, a conduction- or air-cooled 3U CompactPCI single board computer based on NXP’s (formerly Freescale) dual-core QorIQ P2020 processor. The XPedite5530 provides a low-power, high-performance SBC for SWaP constrained industrial, communication, and military applications. The XPedite5530 feature set includes: NXP (formerly Freescale) QorIQ P2020 processor with…

Extreme Engineering Solutions Introduces XPedite5430: Industry’s First 3U CompactPCI Module with NXP Eight-Core P4080 Processor

September 9th, 2010 — News

Extreme Engineering Solutions (X-ES) announces the immediate availability of the XPedite5430, a conduction- or air-cooled 3U cPCI single board computer based on the NXP (formerly Freescale) QorIQ P4080 processor. The XPedite5430 delivers enhanced performance and efficiency for today’s compute and I/O intensive communication, networking, and military ISR applications. The XPedite5430 feature set includes: Freescale P4080 processor…

Extreme Engineering Solutions (X-ES) Presents XPm2010: An Innovative 3U Power Supply with 60 ms Hold-Up Capacitance

August 26th, 2010 — News

Extreme Engineering Solutions (X-ES) is shipping XPm2010, an innovative 3U CompactPCI PICMG 2.11 power supply solution, taking in MIL-STD-704 28 V DC input voltage and providing up to 300 W on 3.3 V, 5 V, and 12 V at 90% efficiency. The XPm2010 is extremely versatile, operating over a wide input voltage range from 16 V to 50 V steady state while maintaining up to…