News & Events | Extreme Engineering Solutions (X-ES)

Extreme Engineering Solutions Introduces XPedite5330: A Low-Power 3U cPCI Single Board Computer Targeting NXP MPC8572E Processor

November 17th, 2008 — News

Extreme Engineering Solutions (X-ES) is pleased to introduce XPedite5330, a new 3U CompactPCI single board computer based on NXP’s (formerly Freescale) PowerQUICC™ III MPC8572E processor. In addition to the MPC8572E dual-core processor, XPedite5330 provides a XMC/PMC site along with Gigabit Ethernet and the traditional PCI bus. To provide a system designer with multiple hardware options, XPedite5330 is…

Extreme Engineering Solutions (X-ES) Provides 3U VPX Development Chassis: VITA 46 3U Two-Slot Chassis Offers Quick Start Development Platform

October 8th, 2008 — News

Extreme Engineering Solutions (X-ES) is pleased to introduce the XPand1000, a VITA 46 3U dual-slot conduction-cooled chassis. The chassis is intended to provide 3U VPX system engineers with an inexpensive desktop platform to jump-start their software or hardware development. The XPand1000 hosts up to two 3U VPX conduction-cooled cards providing fabric interconnect between the two slots, as well…

Extreme Engineering Solutions, Inc. (X-ES) Presents the XPedite7170: A Low-Power 3U VPX Single Board Computer Based on the Latest Intel® Core™2 Duo Processor

September 3rd, 2008 — News

The XPedite7170 is a well-balanced product that excels in all aspects of embedded design. Superior computational ability is achieved with the use of Intel’s next-generation 45 nm low-power Intel® Core™2 Duo processor operating at up to 1.86 GHz. A rich set of communication interfaces includes multiple USB, Gigabit Ethernet, and serial (RS-232/422) ports. With support for up…

Extreme Engineering Solutions (X-ES) Introduces Highest Density Multi-Port Serial Product in 6U CompactPCI Form Factor

August 19th, 2008 — News

Extreme Engineering Solutions (X-ES) expands their acclaimed XPort family of serial products today, introducing the XPort1020, a 6U CompactPCI card with up to 12 multi-protocol serial ports. The XPort1020 takes advantage of the 6U cPCI form factor to provide up to three times the density of other XPort products. The XPort1020’s features include: 6U CompactPCI form factor…

Extreme Engineering Solutions (X-ES) Migrates Multi-Port Serial Products to Conduction–Cooled PMC for High-End Military Requirements.

August 5th, 2008 — News

Extreme Engineering Solutions (X-ES) has expanded their acclaimed XPort multi-protocol serial products into a conduction-cooled PMC (ccPMC) form factor with the immediate release of the XPort1003. Supporting extended temperatures from -55°C to +85°C and severe shock (OS2) and vibration (V3) requirements, XPort1003 features include: Conduction-Cooled PMC form factor Four (4) SCC interfaces provided by NXP…

Extreme Engineering Solutions Introduces Industry-First VPX Single Board Computer Based on Dual-Core NXP MPC8572E Processor

July 21st, 2008 — News

Extreme Engineering Solutions (X-ES) introduces the XPedite5370, a new VITA 46 3U VPX single board computer based on NXP’s (formerly Freescale) PowerQUICC™ III MPC8572E processor. In addition to the NXP MPC8572E dual-core processor, the XPedite5370 provides an XMC/PMC site along with I/O interconnect supporting PCI Express, Serial Rapid I/O, and Gigabit Ethernet. The XPedite5370 is available in convection-…

Extreme Engineering Solutions (X-ES) Presents XPedite5200: An NXP MPC8548E Processor-Based XMC/PrPMC Solution with PCI-X, PCIe and sRIO Support

July 1st, 2008 — News

Extreme Engineering Solutions introduces the XPedite5200, a PrPMC that supports legacy PCI-based systems and newer serial fabric-based requirements. The XPedite5200 is centered around the NXP (formerly Freescale) PowerQUICC™ III MPC8548E device. The card comes standard with PCI-X support, and may optionally be configured for PCI Express or Serial Rapid I/O support via an XMC connector. Multiple…

Extreme Engineering Solutions (X-ES) Presents the XCalibur4100: A Low-Power, Intel® Core™2 Duo Processor-Based, CompactPCI Solution to Answer Customer’s SOS (Save Our System) Calls.

June 11th, 2008 — News

Extreme Engineering has once again answered the embedded system developer’s ubiquitous question: “How can I improve CompactPCI system performance without escalating power requirements or jettisoning critical features?” Full speed ahead with the XCalibur4100, a sturdy product designed to be light on power and quick in performance. The XCalibur4100 combines the low-power Intel® Core™2 Duo processor…

Extreme Engineering Solutions (X-ES) Bridges 3U VPX & 3U cPCI Conduction Cooled SBCs with XTend4010 Hybrid Backplane and System Offering

May 8th, 2008 — News

Listening to their customers, Extreme Engineering Solutions (X-ES) developed an easy answer to the question: “Can I preserve my investment in older 3U cPCI cards with newer X-ES 3U VPX cards?” Witness the nine-slot XTend4010 Hybrid Backplane which marries (3) 3U cPCI slots with (4) 3U VPX slots is a “dual dissimilar” fabric topology. Featured details include: XTend4010 The…

Extreme Engineering Solutions Scores Triple-Double with Processor-based Advanced Mezzanine Cards

October 16th, 2007 — News

Extreme Engineering Solutions (X-ES) announces the introduction of three new Advanced Mezzanine Cards at the 2007 AdvancedTCA Summit. For use in both AdvancedTCA and MicroTCA systems, each of the three AMC boards is a single-width, mid-height AMC featuring a high-performance dual-core processor. The XPedite5140 hosts NXP’s (formerly Freescale) MPC8641D, XPedite7040 employs an Intel® Core™2 Duo,…