XPand1030

The XPand1030 system is a low-cost debug, development, and display platform for 3U conduction-cooled cards. It supports one X-ES CompactPCI SBC and the Cisco® 5940 with direct Ethernet and serial I/O access to each board.

The XPand1030 backplane provides CompactPCI bus between the two slots. Ethernet, RS-232 serial I/O, and DVI are routed to RJ-45, micro-DB-9, and HDMI connectors for easy access.

The XPand1030 is the ideal solution for rapid prototyping mobile ad hoc networks (MANET) based on the Cisco® 5940 ESR. The 5940 3U cPCI hardware is complemented by Cisco IOS® Software and Cisco® Mobile Ready Net capabilities. With support for Dynamic Link Exchange Protocol (DLEP), the latest protocol in the Radio Aware Routing (RAR) family of protocols that enable communication between a router and a radio in a mobile ad hoc network, the 5940 provides highly secure yet scalable video, voice, and data services for mobile and embedded outdoor networks.

Features

• Supports system slot 3U cPCI module
• Supports Cisco® 5940 in peripheral slot
• Integrated heatsink fins
• Built-in cooling fans
• Reset switch
• CompactPCI bus routed between slots
• One front panel RJ-45 Gigabit Ethernet port from SBC
• Three front panel RJ-45 Gigabit Ethernet ports from Cisco® 5940
• RS-232 serial port from each slot routed to micro-DB-9 connectors
• Front panel HDMI port from SBC
• Front panel USB 2.0 port from SBC
• Front panel eSATA port from SBC

Technical Specs

Connectors

• One 3U cPCI SBC slot
• One Cisco® 5940 slot
• ATX power supply connector
• Four RJ-45 Ethernet connectors
• One USB Type A connector
• One eSATA connector
• One HDMI connector
• Two micro-DB-9 connectors

Utility Functions

• Front panel reset switch
• Back panel power switch
• Back panel power rail LED indicators

Cisco® 5940 Module

• Ruggedized 3U CompactPCI embedded router
• Cisco IOS® Software

I/O Routing

• J1 (SBC slot) Ethernet port  routed to J2 (Cisco® 5940 slot) Ethernet port 0
• J1 (SBC slot) Ethernet port 1 routed to RJ-45 connector
• J2 (Cisco® 5940 slot) Ethernet ports 1 through 3 routed to RJ-45 connectors
• J1 and J2 serial ports routed to micro-DB-9 connectors

External Power Supply

• ATX power supply

Maximum Power Capacity

• 100 W total

Accessories

• Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.
• ATX Power Supply (70003134)

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet