The XPort1000 is an intelligent communications controller targeting high-performance, low-cost applications. The XPort1000 combines a wide array of supported serial protocols and a configurable I/O routing structure to pack maximum flexibility into an industry standard PMC module.
Powered by the Freescale MPC8260 (PowerQUICC™ II) processor, the XPort1000 implements four serial communication ports providing an EIA-530-A-compliant signal set supporting HDLC/SDLC, UART, transparent, and BiSync modes, along with NRZ, NRZI, FM0, FM1, Manchester and Differential Manchester encoding. Coupled with software configurable support for RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114, the XPort1000 provides a wide range of serial options.
The XPort1000 will drive down both cost and power consumption from your system design. The PCI bridge is integrated on-chip allowing the XPort1000 to draw up to 40% less power and cost up to 30% less than conventional designs based on other processors.
Technical Specs
Processor
- Freescale MPC8250 PowerQUICC™ II processor
- Embedded PowerPC G2 core
- Up to 266 MHz
- 280 Dhrystones at 200 MHz
- 66 MHz 60x bus
- 16 kB instruction and data caches
- 32 kB internal SRAM
- Integrated MMU
- Core-disabled mode supported
Memory
- Up to 256 MB SDRAM
- Up to 16 MB soldered Flash
- 512 kB socketed Flash
- 2 kB SEEPROM
Serial Communication Controller
- HDLC, UART, transparent and BiSync modes
- DPLL supporting NRZ, NRZI, FM0, FM1, Manchester and Differential Manchester
- Independent BRGs for each SCC transmitter and receiver
- Two external custom oscillators (optional)
Serial Interface
- Four DTE SCC ports supporting either RS-232, RS-422, RS-423, RS-485, or MIL-STD-188-114A Type I and II balanced/unbalanced modes
- 10 Mbps max synchronous
- 4 Mbps max asynchronous
- EIA-530-A DTE/DCE cable or software selectable
Software
- Linux BSP
- Wind River VxWorks BSP
- Wind River VxWorks, Linux, and Microsoft Windows drivers
Physical Characteristics
- PMC form factor
- Dimensions: 149 mm x 74 mm, 10 mm stacking height
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
Power Requirements (Typical)
- +3.3 V, 0.6 A, 1.98 W
- +5.0 V, 0.35 A, 1.75 W
- +12.0 V, 0.012 A, 0.15 W
- -12.0 V, 0.012 A, 0.15 W
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet