The XPort1013 is an intelligent communications controller targeting high-performance serial applications. The XPort1013 combines a wide array of supported serial protocols, a broad range of serial interface standards, and a flexible I/O routing structure, to pack maximum flexibility into an industry-standard PCI card.
Powered by the NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor, the XPort1013 implements four serial communication ports providing an EIA-530-A-compliant signal set, supporting HDLC/SDLC, UART, transparent, and BiSync modes, with NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester encoding. Coupled with software configurable support for RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114A, the XPort1013 provides maximum flexibility for your application.
For a system designer, the XPort1013 will help drive both cost and power consumption down. Since the PCI bridge is integrated on-chip, the XPort1013 draws up to 40% less power, and costs up to 30% less than conventional designs based on other processors.
Technical Specs
Processor
- NXP (formerly Freescale) PowerQUICC™ II MPC8270 processor
- Embedded PowerPC G2 core
- 450 MHz max processor speed
- 280 Dhrystones at 200 MHz
- 66 MHz 60x bus
- 16 L1 instruction/data caches
- 32 kB internal SRAM
- Integrated MMU
- Integrated Floating-Point Unit
- Core-disabled mode
Memory
- Up to 512 MB SDRAM
- 64 MB surface-mount flash
- 2 kB SEEPROM
Serial Communication Controller
- HDLC, UART, transparent, and BiSync modes
- DPLL supporting NRZ, NRZI, FM0, FM1, Manchester, and Differential Manchester
- Independent BRGs for each SCC transceiver
- Two external custom oscillators for precision serial clocking (optional)
Serial Interface (Standard)
- Four software-configurable SCC ports supporting RS-232, RS-422, RS-423, RS-485, and MIL-STD-188-114A Type I and II balanced/unbalanced modes
- 10 Mbps max synchronous
- 4 Mbps max asynchronous
- EIA-530-A DTE/DCE software selectable
Software
- Linux BSP
- Wind River VxWorks BSP
- VxWorks, Linux, Windows, and OSE drivers
Physical Characteristics
- PCI form factor
- 4.2 in. (L) x 5.875 in. (W)
- 3.8 oz.
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
Power Requirements (Typical)
- 3.3 V, 0.60 A, 1.98 W
- 5 V, 0.35 A, 1.75 W
- +12 V, 0.012 A, 0.15 W
- -12 V, 0.012 A, 0.15 W
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
