XPedite4000

The XPedite4000 is a high-performance Processor PMC (PrPMC) module. A PCI-X PMC interface provides the system designer with ample bandwidth for I/O intensive applications. Two front panel Ethernet ports provide a flexible I/O interface by auto-negotiating between 10, 100, and 1000 Mbps operation.

The XPedite4000 utilizes the IBM PowerPC 750GX embedded processor. With integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the XPedite4000 offers a highly-optimized solution for packet processing and general computing applications. The serial and Gigabit Ethernet interfaces are accessible through the front panel, and a Gigabit Ethernet interface, an I²C interface, and four GPIO pins are accessible through P14 I/O. A second serial port is accessible through an onboard header.

The XPedite4000 is ideal for PrPMC applications requiring low cost and power yet high bandwidth and processing performance. The 750GX processor, while operating at 1 GHz, provides 2320 DMIPs of processing power.

Features

• IBM 750GX PowerPC 750GX 500-1000 MHz processor
• 133 MHz PCI-X PrPMC and local bus interfaces
• Up to 1 GB DDR SDRAM
• Up to 128 MB soldered flash
• Two Gigabit Ethernet ports
• Two RS-232 serial ports
• Front or rear I/O
• Integrated 1 MB L2 cache
• Linux BSP
• Wind River VxWorks BSP

Technical Specs

Processor

• IBM PowerPC 750GX
• 1000 MHz max processor speed
• 133 MHz PCI-X interface
• 32 kB L1 instruction/data caches
• 1 MB L2 cache

Non-Volatile Storage

• Up to 128 MB surface mount flash
• 512-bytes SEEPROM

Ethernet

• Two Ethernet controllers
• Auto-negotiates between 10/100/1000 Mbps
• Front panel/rear I/O

DDR SDRAM

• Up to 1 GB
• 3.2 Gb/s peak bandwidth

Front Panel I/O

• One Gigabit Ethernet port
• One RS-232 serial port
• Link and activity LEDS

Rear I/O

• One Gigabit Ethernet port
• Four GPIO pins
• Two RS-232 serial ports

RTC

• M41T00 I²C timekeeper
• 60 hour clock retention

Software

• Linux BSP
• Wind River VxWorks BSP
• Ethernet, I²C, and RTC drivers

Physical Characteristics

• PMC form factor
• Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
• Conformal coating available as an ordering option

Power Requirements (Estimate)

• 3.3 V, 4.3 A, 14.2 W

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet