XPedite5600

The XPedite5600 is a high-performance, XMC/PrPMC, single board computer supporting an NXP (formerly Freescale) QorIQ P2041 processor.

For applications that are power conscious, the P2041 processor offers four e500mc cores running at up to 1.5 GHz with a single channel of DDR3 memory, all within a modest power envelope. An additional, reduced-function processor is available for further flexibility in meeting power and performance budgets.

The XPedite5600 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Wind River VxWorks, Linux, and Green Hills INTEGRITY-178 tuMP Board Support Packages (BSPs) are available.

Features

• NXP QorIQ P2041 processor with four Power Architecture® e500mc cores at up to 1.5 GHz
• Alternate NXP QorIQ processor: P2040
• Air-cooled
• Up to 8 GB of up to DDR3-1333 ECC SDRAM
• Up to 256 MB of NOR flash (with redundancy)
• Up to 16 GB of NAND flash
• x4 PCI Express interface to P15
• XAUI to P16
• PCI PrPMC interface
• Four Gigabit Ethernet ports
• Two RS-232/422/485 serial ports
• Two USB 2.0 ports (one to P14 and one to the front panel or P14)
• Two SATA ports to P16
• Linux BSP
• Wind River VxWorks BSP
• Green Hills INTEGRITY-178 tuMP BSP

Technical Specs

Processor

• NXP (formerly Freescale) QorIQ P2041 processor
• Four Power Architecture® e500mc cores at up to 1.5 GHz
• 128 kB L2 cache per core
• 1 MB L3 cache per channel
• IEEE 754 Floating-Point Unit support

Alternate Processor Configuration

• P2040 processor with four Power Architecture® e500mc cores at up to 1.5 GHz (no XAUI, no L2 cache)

Memory

• Up to 8 GB of up to DDR3-1333 ECC SDRAM
• Up to 256 MB of NOR flash (with redundancy)
• Up to 16 GB of NAND flash

PrPMC Interface

• 66/33 MHz PCI
• 32-bit bus interface

P15 XMC Interface

• x4 configurable PCI Express

P14/P16 XMC/PMC Interface

• Two 10/100/1000BASE-T Ethernet ports
• One 1000BASE-X Ethernet port to P16
• Two RS-232/422/485 serial ports
• 3.3 V GPIO
• Up to two USB 2.0 ports
• Two SATA ports capable of 3 Gb/s
• One XAUI port to P16 (optional)

Front Panel I/O

• One Gigabit Ethernet port
• Two RS-232 serial ports
• One USB 2.0 port

Software Support

• Linux BSP
• Wind River VxWorks BSP
• Green Hills INTEGRITY-178 tuMP BSP

Physical Characteristics

• Air-cooled XMC/PMC form factor
• Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.

Accessories

• XIt2041 (90060220) - PMC I/O Module (PIM) with Gigabit Ethernet, SATA, USB, Serial, and DVI
• XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable
• XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter
• XTend3100 (90050115) - Dual XMC/PrPMC Carrier for Development and Testing

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet