XPedite7101

The XPedite7101 is a high-performance, low-power XMC/PMC module based on the Intel® Core™2 Duo processor. With a x4 PCI Express or 32-bit, 33/66 MHz PCI interconnect and a Gigabit Ethernet port, the XPedite7101 is ideal for high-bandwidth data-processing applications.

The XPedite7101 accommodates up to 2 GB of DDR2-400 ECC SDRAM to support memory-intensive applications, and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA 1.5 Gb/s, and RS-232 or RS-422/485 serial.

Linux 2.6, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Microsoft Windows drivers, are available for the XPedite7101.

Features

• Intel® Core™2 Duo processor at up to 1.8 GHz
• XMC/PMC module
• Conduction or air cooling
• Up to 2 GB of DDR2-400 ECC SDRAM
• 2 MB firmware hub flash (or 1 MB with redundancy)
• 4 GB of NAND flash
• x4 PCI Express XMC interface
• 32-bit, 33/66 MHz PCI PMC interface
• Gigabit Ethernet port with integrated magnetics
• Two USB 2.0 high-speed ports
• Four SATA 1.5 Gb/s ports
• Two RS-232 ports or one RS-422/485 port
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• Microsoft Windows drivers

Technical Specs

Processor

• Intel® Core™2 Duo at up to 1.8 GHz
• 200 MHz (800 MT/s) FSB
• Up to 6 MB of L2 cache

Memory

• Up to 2 GB of DDR2-400 ECC SDRAM
• 2 MB firmware hub flash (or 1 MB with redundancy)
• 4 GB of NAND flash

PMC Interface

• 33/66 MHz PCI
• 32-bit interface

P14 or P16 Mezzanine Interface

• Two USB 2.0 ports
• Four SATA 1.5 Gb/s ports
• Two RS-232 ports or one RS-422/485 port
• One 10/100/1000BASE-T Ethernet port
• Four GPIO signals

P15 XMC Interface

• x4 PCI Express

Software

• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• Microsoft Windows drivers

Physical Characteristics

• XMC/PMC form factor
• Dimensions: 149 mm x 74 mm, 10 mm stacking height

Environmental Requirements

Contact factory for appropriate board configuration based on environmental requirements.

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• Power will vary based on configuration and usage. Please consult factory.

Accessories

Documentation

Datasheet

To view all of the information about this product in a PDF, please download the datasheet.

Download Datasheet

Technical Documents

SupportNet is your source for product manuals, technical support, and software downloads.

Access SupportNet