The XCalibur1531 is a high-performance, multiprocessing, 6U VME, single board computer that is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. With dual Power Architecture® e500 cores running at up to 1.5 GHz, the NXP (formerly Freescale) MPC8572E delivers enhanced performance and efficiency for today’s embedded computing applications.
The XCalibur1531 provides two separate channels of up to 4 GB (2 GB each) DDR2-800 ECC SDRAM, two PrXMC/PrPMC slots, as well as 256 MB of NOR flash (with redundancy). The XCalibur1531 also supports four Gigabit Ethernet ports, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front panel and/or P2/P0 backplane connectors.
The XCalibur1531 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Operating system support for Wind River VxWorks, Microsoft Windows, QNX Neutrino, and Linux is available.
Technical Specs
Processor
- NXP (formerly Freescale) PowerQUICC™ III MPC8572E processor
- Dual Power Architecture® e500 cores at up to 1.5 GHz
- 1 MB of shared L2 cache
Memory
- Up to 4 GB of DDR2 ECC SDRAM in two channels
- Up to 16 GB of NAND flash
- Up to 256 MB of NOR flash (with redundancy)
- 16 kB I²C EEPROM
VME
- VME64 (VITA 1-1994 R2002)
- VME64x (VITA 1.1-1997 R2003)
- 2eSST (VITA 1.5-2003)
- Ethernet on VME64x (VITA 31.1-2003)
- PMC I/O on VME (VITA 35-2000)
XMC/PrPMC
- PCI-X (64/32-bit, 100/66 MHz)
- PCI (64/32-bit, 66/33 MHz)
- x8 PCIe port to P15 and P25 (XMC)
Front Panel
- Two RS-232 serial ports
- One Gigabit Ethernet port
- One USB 2.0 port
- General-purpose LEDs
Back Panel
- Two RS-232/422/485 serial ports
- Three Gigabit Ethernet ports
- PMC I/O
- Two USB 2.0 ports
Software
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Greens Hills INTEGRITY BSP
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
