The XCalibur4301 is a high-performance, 6U CompactPCI, multiprocessing, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the Intel® Core™ i7 processor, the XCalibur4301 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.
The XCalibur4301 provides two separate channels of up to 8 GB of DDR3-1066 ECC SDRAM, two PrXMC/PrPMC slots, 32 MB of NOR flash, and up to 128 GB of NAND flash. The XCalibur4301 also supports Gigabit Ethernet, I²C, USB, XMC I/O, PMC I/O, and DVI dual-head graphics out the connectors.
The XCalibur4301 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Operating system support for Wind River VxWorks, QNX Neutrino, Linux, and Microsoft Windows drivers is available.
Technical Specs
Processor
- Intel® Core™ i7 processor operating at 2.53, 2.0, 1.06, or 1.33 GHz
- Dual-core with Hyper-Threading Technology
- Intel® QM57 chipset
- Dual-channel integrated memory controller
- Integrated graphics controller
- 4 MB of shared cache
Memory
- Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
- 32 MB NOR flash
- Up to 128 GB of NAND flash
- 16 kB I²C EEPROM
cPCI
- 66 MHz 64-bit PCI interface to J1 and J2
- PICMG 2.1 (Hot Swap support)
- PICMG 2.3 (PMC I/O to P3 and P5)
- PICMG 2.9 (dedicated IPMI controller)
- PICMG 2.16 (two 10/100/1000BASE-T Ethernet ports)
PMC
- PCI-X (32/64-bit, 66/100 MHz)
- PCI (32/64-bit, 33/66 MHz)
XMC
- x8 Gen2 at 2.5 GT/s PCI Express port to J15 and J25
Graphics
Front Panel I/O (Optional)
- One HDMI video interface
- One 10/100/1000BASE-T Ethernet port
- One USB 2.0 port
Back Panel
- Two RS-232/422/485 serial ports
- Two 10/100/1000BASE-T Ethernet ports
- PMC I/O
- DVI video
- Four SATA ports capable of 3 Gb/s
- Two USB 2.0 ports
Software Support
- Linux BSP
- Wind River VxWorks BSP
- QNX Neutrino BSP
- Green Hills INTEGRITY
- Microsoft Windows drivers
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
