The XCalibur4331 is a high-performance, 6U VME, multiprocessing, single board computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With the Intel® Core™ i7 processor, the XCalibur4331 delivers enhanced performance and efficiency for today’s network information processing and embedded computing applications.
The XCalibur4331 provides up to 8 GB of DDR3-1066 ECC SDRAM in two channels, two XMC/PrPMC slots, 32 MB of NOR flash, and up to 128 GB of NAND flash. The XCalibur4331 also supports four Gigabit Ethernet ports, two DVI graphics ports, I²C, XMC I/O, PMC I/O, and RS-232/422/485 serial ports out the front/back panel.
The XCalibur4331 is a powerful, feature-rich solution for the next generation of compute-intensive embedded applications. Operating system support for Wind River VxWorks, QNX Neutrino, Linux Board Support Packages (BSPs) is available, as well as Microsoft Windows drivers.
Technical Specs
Processor
- Intel® Core™ i7 processor operating at 2.53, 2.0, 1.06, or 1.33 GHz
- Dual-core with Intel® Hyper-Threading Technology
- Intel® QM57 chipset
- Dual-channel integrated memory controller
- Integrated graphics controller
- 4 MB of shared cache
Memory
- Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
- 32 MB of NOR flash
- Up to 128 GB of NAND flash
- 16 kB I²C EEPROM
VME
- VME64 (VITA 1-1994 R2002)
- VME64x (VITA 1.1-1997 R2003)
- 2eSST (VITA 1.5-2003)
- Ethernet on VME64x (VITA 31.1-2003)
- PMC I/O on VME (VITA 35-2000)
Graphics
- Integrated high-performance 3D graphics controller
- DVI-D routed to P0 on PMC 1 I/O pins (optional)
PrPMC
- PCI-X (64/32-bit, 100/66 MHz)
- PCI (64/32-bit, 66/33 MHz)
XMC
- x8 Gen2 at 2.5 GT/s PCI Express port to J15 and J25
Front Panel I/O (Optional)
- One HDMI video interface
- One 10/100/1000BASE-T Ethernet port
- One USB 2.0 port
- General-purpose LEDs
Back Panel
- Two RS-232/422/485 serial ports
- Three 10/100/1000BASE-T Ethernet ports
- Four SATA ports capable of 3 Gb/s
- PMC I/O
- Two USB 2.0 ports
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- GHS INTEGRITY BSP (contact factory)
- QNX Neutrino BSP (contact factory)
- LynuxWorks LynxOS BSP (contact factory)
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Accessories
Please contact X-ES Sales at
sales@xes-inc.com or by phone at
+1-608-833-1155 for information on this product's accessories.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
