The XPedite5650 is a ruggedized COM Express® module that complies with the COM Express® Mini form factor (55 mm x 84 mm) and supports an enhanced Type 10 pinout. The ultra-small, standards-based, COM Express® form factor brings processing to a wide range of applications.
Available in both conduction- and air-cooled versions, the XPedite5650 supports the NXP (formerly Freescale) QorIQ P2041 processor. With four Power Architecture® e500mc cores running at up to 1.5 GHz, the P2041 delivers enhanced performance and efficiency for today’s network information processing and other embedded computing applications.
The XPedite5650 complements processor performance with 2 GB or 4 GB of up to DDR3-1333 ECC SDRAM. It also hosts numerous I/O ports, including one copper Gigabit Ethernet port, one SerDes Gigabit Ethernet port, a single x2 PCIe port, two x1 PCIe ports, two USB 2.0 ports, two SATA ports capable of 3 Gb/s, two I²C ports, two serial ports, two SPI interfaces, and IEEE 1588 support.
The XPedite5650 provides a high-performance, feature-rich solution for current and future generations of embedded applications. Operating system support packages for the XPedite5650 include Wind River VxWorks, QNX Neutrino, LynuxWorks LynxOS, and Green Hills INTEGRITY-178 tuMP.
Technical Specs
Processor
- NXP (formerly Freescale) QorIQ P2041 processor
- Four Power Architecture® e500mc cores at up to 1.5 GHz
- 1 MB of shared L3 cache (128 kB L2 cache)
Memory
- 2 GB or 4 GB of up to DDR3-1333 SDRAM (Up to 4 GB is available using an oversized PCB. Contact factory for details.)
- Up to 256 MB of NOR flash (with redundancy)
- Up to 16 GB of NAND flash
COM Express®
- Modified Type 10FS pinout
- Mini form factor (55 mm x 84 mm)
Ruggedization and Reliability
- Class III PCB fabrication and assembly
- Soldered DDR3 ECC SDRAM
- Tin whisker mitigation
- Designed and tested for extended solder joint reliability
- Additional mounting holes for rugged and conduction-cooled environments
- Bootloader and OS-level BIT support
Interface
- One 10/100/1000BASE-T port
- One 10/100/1000BASE-X port
- SPI
- IEEE 1588
- Two SATA ports capable of 3 Gb/s
- Two x1 PCIe links
- One x2 PCIe link
- Two USB 2.0 ports
- Two I²C
- Two serial ports
Software Support
- Linux BSP
- Wind River VxWorks BSP
- Green Hills INTEGRITY-178 tuMP BSP
- QNX Neutrino BSP (contact factory)
- LynuxWorks LynxOS BSP (contact factory)
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
