The XIt1010 is a 6U VME Rear Transition Module (RTM) which supports various X-ES Single Board Computer (SBC) products. When installed in an RTM slot of an appropriate VME64 backplane, the XIt1010 routes I/O signals from an associated SBC’s rear panel P0 and P2 connectors to connectors on the XIt1010, to allow connection of these signals to external equipment.
The XIt1010 routes three 10/100/1000BASE-T Ethernet ports to RJ-45 connectors, two RS-232 ports to a micro-DB-9 connector, four USB ports to Type A connectors (three via onboard USB hub), and a SATA port to an eSATA connector. A PIM site is also provided for access to P14 rear I/O from a mezzanine installed on the corresponding SBC.
The XIt1010 also features an optional onboard USB audio codec, with its audio inputs and outputs routed to 3.5 mm stereo jacks accessible from the front panel.
Technical Specs
Ethernet
- Three 10/100/1000BASE-T Ethernet ports to RJ-45 connectors
Serial
- Two RS-232 ports to micro-DB-9 connectors
USB
- One USB port to front panel Type A connector on front panel
- One USB port to internal USB hub
- Three USB ports from USB hub to internal vertical Type A connectors
- One USB port from hub routed to internal vertical Type A connector or optional onboard audio codec
SATA
- One SATA port to front panel eSATA connector
Audio
- USB audio codec
- Audio input and output ports to front panel 3.5 mm stereo jacks
Physical Characteristics
- VME Rear Transition Module (RTM)
- Dimensions: 233.35 mm x 80 mm
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
