The XPedite7470 is a high-performance, low-power, 3U VPX-REDI, single board computer based on the 2nd and 3rd generation Intel® Core™ i7 processor and the Intel® QM67 chipset.
With two PCI Express Fat Pipe P1 interconnects and two Gigabit Ethernet ports, the XPedite7470 is ideal for the high-bandwidth and processing-intensive demands of today’s military and avionics applications. Floating-Point-intensive applications such as radar, image processing, and signals intelligence will benefit from the performance boost provided by the Intel® Advanced Vector Extensions (Intel® AVX) incorporated into the Intel® Core™ i7 processor.
The XPedite7470 accommodates up to 8 GB of DDR3 ECC SDRAM in two channels to support memory-intensive applications. The XPedite7470 also hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, graphics, and RS-232/422/485 through the backplane connectors.
The XPedite7470 can be used in either the system slot or peripheral slot of a VPX backplane. Wind River VxWorks and Linux Board Support Packages (BSPs) are available, as well as Microsoft Windows drivers.
Technical Specs
Processor
- Quad- or dual-core Intel® Core™ i7
- Intel® Turbo Boost Technology
- Intel® Hyper-Threading Technology
- AVX instruction set extensions
- Integrated with Intel® QM67 chipset
- Dual-channel integrated memory controller
- Integrated high-performance 3D graphics controller
Quad-Core Processor Configurations
- Core™ i7-3612QE: 2.1 GHz, 6 MB cache
Dual-Core Processor Configurations
- Core™ i7-2655LE: 2.2 GHz, 4 MB cache
- Core™ i7-2610UE: 1.5 GHz, 4 MB cache
- Core™ i7-3555LE: 2.5 GHz, 4 MB cache
- Core™ i7-3517UE: 1.7 GHz, 4 MB cache
Memory
- Up to 8 GB of DDR3 ECC SDRAM in two channels
- 32 MB of NOR boot flash
- Up to 16 GB of NAND flash
Graphics
- Integrated high-performance 3D graphics controller
- Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
VPX (VITA 46) P0 I/O
VPX (VITA 46) P1 I/O
- x4 PCI Express Fat Pipe interface to P1.A
- x4 PCI Express Fat Pipe interface to P1.B
- Two 1000BASE-BX Gigabit Ethernet ports (or one 10/100/1000BASE-T port to P1 and one port to P2)
- XMC P16 I/O, mapping P1w9-X12d per VITA 46.9
VPX (VITA 46) P2 I/O
- One 10/100/1000BASE-T Gigabit Ethernet port
- Two SATA ports capable of 3 Gb/s
- Two USB 2.0 ports
- Up to two RS-232/422/485 serial ports
- 3.3 V GPIO signals
- Two HDMI/DVI-D or Dual-Mode DisplayPort interfaces
- Optional I/O can be replaced by a subset of P2w1-P64s I/O, Wafer 1-8 is NC
XMC/PMC Site
- 32-bit, 33 MHz PCI bus (PMC interface)
- x4 PCIe port (XMC interface)
- Two SATA ports capable of 6 Gb/s (XMC interface)
Security and Management
- Optional Trusted Platform Module (TPM)
- Non-volatile memory write protection
Software Support
- Wind River VxWorks BSP
- Linux BSP
- Microsoft Windows drivers
- Contact factory for availability of Green Hills INTEGRITY, QNX Neutrino, and LynuxWorks LynxOS BSPs
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 0.85 in. and 1.0 in. pitch with solder-side cover
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 3, 5
- Conformal coating available as an ordering option
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
