The XPedite7670 is a high-performance, 3U VPX-REDI, single board computer based on the Intel® Xeon® D-1500 family processors (formerly Broadwell-DE). The Intel® Xeon® D processor can provide up to 16 Xeon®-class cores in a single, power-efficient System-on-Chip (SoC) package.
The XPedite7670 maximizes network performance with two 10 Gigabit Ethernet ports configured as 10GBASE-KR and two Gigabit Ethernet ports which are configured as 10/100/1000BASE-T.
Up to eight lanes of PCI Express Gen3 are routed to the backplane P1 connector, supporting a single x8 PCIe interface or two x4 PCIe interfaces. This interface also supports Non-Transparent Bridging, enabling direct communication with other Intel® processors, and there is no need for a separate switch module in the system, further reducing SWaP-C for the system integrator.
The XPedite7670 provides superior growth and expansion capabilities by including an XMC site with full 10 mm I/O envelope support, while maintaining a 0.8 in. VPX slot pitch (12 core processor configurations require 1.0 in. pitch). This gives system integrators a plethora of COTS options for additional I/O, storage, or processing.
The XPedite7670 accommodates up to 16 GB of DDR4-2133 ECC SDRAM in two channels to support memory-intensive applications. The XPedite7670 also hosts numerous I/O ports, including USB, SATA, and RS-232/422/485 serial through the backplane connectors.
Wind River VxWorks and X-ES Enterprise Linux Support Packages (XEL) are available. The XPedite7670 uses coreboot, powered by Intel®’s Firmware Support Package (FSP), to provide fast boot times and significantly simplify code traceability over legacy BIOS implementations.
Technical Specs
Processor
- Intel® Xeon® D-1500 family processors (formerly Broadwell-DE)
- Up to 16 Xeon®-class cores in a single, power-efficient SoC package
- 4, 8, or 12 core SKUs available with native extended temperature support
Memory
- Up to 16 GB of DDR4-2133 ECC SDRAM in two channels
- Up to 32 GB of NAND flash
- 32 MB NOR boot flash
- 64 kB EEPROM
VPX (VITA 46) P0 I/O
- Two IPMB connections to optional IPMI Controller (IPMC)
VPX (VITA 46) P1 I/O
- x4 PCI Express Gen3-capable interface to P1.A
- x4 PCI Express Gen3-capable interface to P1.B
- Two 10GBASE-KR Ethernet ports
- XMC P16 I/O, mapping P1w9-X12d per VITA 46.9
VPX (VITA 46) P2 I/O
- Two 10/100/1000BASE-T Gigabit Ethernet ports
- Up to six SATA ports capable of 6 Gb/s
- Two USB 3.0/2.0 ports
- Up to six RS-232 or four RS-422/485 serial ports
- 3.3 V GPIO signals
XMC Site
- x8 PCI Express Gen3-capable interface
- X12d P16 I/O
Additional Features
- Non-volatile memory write protection
- Optional Trusted Platform Module (TPM)
- IEEE 1588 support on two Gigabit Ethernet ports
- Optional VITA 46.11 Tier 1 and Tier 2 IPMI Controller (IPMC)
Software Support
Physical Characteristics
- 3U VPX-REDI conduction- or air-cooled form factor
- Dimensions: 100 mm x 160 mm
- 0.8 in. pitch without solder-side cover
- 1.0 in. pitch with Two-Level Maintenance (2LM) support (optional)
Environmental Requirements
Contact factory for appropriate board configuration based on environmental requirements.
- Supported ruggedization levels (see the X-ES Ruggedization Chart): 3, 5
- Conformal coating available as an ordering option
- Thermal performance will vary based on CPU frequency and application
Power Requirements
- Power will vary based on configuration and usage. Please consult factory.
Documentation
Datasheet
To view all of the information about this product in a PDF, please download the datasheet.
Download Datasheet
Technical Documents
SupportNet is your source for product manuals, technical support, and software downloads.
Access SupportNet
